Avinject 1C PU-foam can be used as a 1 component system for inject into wet condition or as a 2- component system with as a ratio of 1:1 with water for injection into dry cracks.

To avoid the problems, one must understand that both the
products are temperature & moisture sensitive. Therefore,
material must be stored in a temperature does not exceed
30 degree C or not lower than 10 degree C

Shelf life is 1 yr. & all drums that are partly used must be
covered by nitrogen & resealed to prevent ingress of moisture

❖ Do not breathe dust/fume/gas/mist/vapor/spray
❖ In case of improper ventilation wear respiratory protection
❖ Wear protective gloves/clothing and eye & face protection
❖ If in eyes: Rinse cautiously with water for several
minutes, remove contact lenses, if present & easy to do.
Continue rinse.
❖ If on skin or Hair: - Take off immediately all
contaminated clothing. Rinse skin with water & shower

AVINJECT 1C PU-FOAM (Uncured)